Kenwood KDC-DAB43U Instrukcja Użytkownika Strona 1

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Odbiorniki i wzmacniacze Kenwood KDC-DAB43U. Kenwood KDC-DAB43U User Manual [en] Instrukcja obsługi

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 2
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 0
Determining the antenna instaiiation iocation
. « where the earth sheet of the Amplifier ©can be stuck on the metal part of the front pillar.
Antenna instaiiation
1 Check the installation location.
2 Wipe the area where antenna film ©,
amplifier unit©, and earth sheet is to be
placed with the included cleaner ®.
The paint work on the metal surface need
not be removed
Ensure that the glass surface is completely
dry before mounting element
^ If the glass is cold to ensure good adhesion
warm the glass with the cars windscreen
heater
Remove the backing (tag I) of antenna
film © horizontally and stick the
antenna on the front glass.
5 After sticking, rub the element on the
windscreen in the direction of the arrow
shown in the figure to bond it & remove
bubbles.
I
Remove the backing gently
Do not touch the sticky side of the
antenna film
4 Remove the backing (tag II) of antenna
film © vertically and stick the antenna
gently while applying pressure.
6 Remove the backing film (tag III).
■ Do not touch the feeder terminal of the
element. Also, do not apply any glass
cleaner.
Feeder terminal
Przeglądanie stron 0
1 2

Podsumowanie treści

Strona 1 - Antenna instaiiation

Determining the antenna instaiiation iocation. « where the earth sheet of the Amplifier ©can be stuck on the metal part of the front pillar.Antenna in

Strona 2 - Select the DAB antenna power

Match thecontact tabsof the amplifier© with the A on the antenna film © and stick. Do not touch the feeder terminal or the sticky surface (adhesive s

Komentarze do niniejszej Instrukcji

Brak uwag